34
GB
The display reverts to the standby display
after a brief period of time.
Confi rm the entry by pressing the
"Funktion/
Mode"
key until the newly set value fl ashes on
the display. The preselection symbol appears
on the display as well as
"
d 2:2
“
.
You can undertake further time preselections
in the same way.
The control prevents the set programs
from overlapping during programming. A
break of at least 10 minutes is automatically
maintained between two programmes.
This does not apply for the maximum heating
time of 12 h; here the heating period is 6 h.
20:03
10 minutes before a program begins, the
preselection time is shown alternating with
the time of day in the display.
In this time and during the automatic heating
phase, the time of day cannot be changed in
the "F1" menu.
In order to switch on manually in this time, the
preselection time must initially be deactivated
by pressing the
"An/Aus "
key.
If
"-:--"
is selected as the preselection
time, the appropriate program is deactivated.
06:54
07:00
2:2
P
03:30
If the control is running in moist mode
(HCS 9003...,), the time set here is the total
time including the reheating time set in F2.
I f t h e h e a t i n g t i m e i s s e t t o
t h e m a x i m u m v a l u e o f 1 2 h ,
a heating break of 6 h is switched on once
this 12 h period has ended.
