3
GB
Technical data
Nominal voltage:
400 V 3 N AC 50 Hz
Switching load:
max. 9 kW Ohm resistive load (AC1 - mode)
device can be extended by connecting powered control units
up to 36 kW
Heating time limit:
6 hr, 12 hr or no heating time limit
Display:
Jumbo backlit LCD
Protection class:
IPx4 in line with DIN 40050 splashed water resistant
Normal range for sauna: 30 to 110°C
Sensor system:
KTY sensor with safety temperature limiter 142°C
Control characteristic:
digital two-point regulation
Fan output:
min. 25 W max.100 W (only fan excluding capacitor)
Light:
min. 25 W max.100 W (only Ohm resistive load)
Coloured light (optional): max. 100 W per colour
Colour on-time:
1 - 10 min
Colour order:
red - red/yellow - yellow - yellow/green - green - green/blue - blue
- blue/red
Error display:
via warning triangle (fl ashing) and error code on LCD
Ambient temperatures:
-10°C to +35°C
Storage temperatures:
-20°C to +60°C
Fuse protection on the light and the ventilation can
be a maximum of 1A delay action. There is a danger
of fi re if greater fuse protection is used!
Package contents
(subject to change)
Included with the control unit are:
1. An heater-sensor board with overheat shutoff protection, KTY-sensors with sensor hou-
sing , two 3x25 mm fastening screws and a 1,7 m long sensor cable, red and white.
2. A plastic bag with three 4 x 20 mm fastening screws.
3. A replacement overheat protection module.
