EOS Bi-O Filius, Инструкция по установке и эксплуатации

Страница: 35 / 62

35
GB
3. Make the cable connections according to the
wiring diagram. The corresponding wiring
diagram is given in this manual (fi g. 4).
power supply cable
Fig. 4
4. Install the terminal block back into the origi-
nal position in the heater and fasten it with
two screws.
5. The terminals for connection of the vaporizer
are placed on the left side of the heater. Make
the cable connections to the vaporizer as de-
scribed above (see fi g. 5).
2. In order to connect the power supply cable
fi rst undo both screws as shown in fi g. 3 and
pull the terminal block downwards (fi g. 3a).
Fig. 3
Fig. 3a
Fig. 5
Connection terminal
power supply cable
Cable screw connection
Cable screw connection
Connection terminal