EOS Bi-O Filius, Инструкция по установке и эксплуатации

Страница: 32 / 62

32
GB
4. Make the cable connections according to the
wiring diagram. The corresponding wiring
diagram is given in this manual (fi g. 4).
power supply cable
Fig. 4
5. Install the terminal block back into the origi-
nal position in the heater and fasten it with
two screws.
6. Hook the sauna heater with the rear wall re-
ceiving slots onto the fi xing screws.
3. In order to connect the power supply cable
fi rst undo both screws as shown in fi g. 3 and
pull the terminal block downwards (fi g. 3a).
Fig.3
Fig.3a
Cable screw connection
Connection terminal
7. Secure the heater on the sauna wall behind it
using 2 screws through the holes in the rear
upper edge of the heater (see fi g. 5) or alter-
natively secure it to the side wall, as shown
on fi g. 6.
Fig. 6
9. After that put the cover panel back on and
secure it with 4 screws.
A
Ansicht
A
Screws 4,2 x 9,5
Securing
screws
8. Screw the supplied refl ector shield as shown
in pic. 5 with 3 screws 4.2 x 9.5 and the 2 se-
curing screws.
Fig. 5
Corrugated-
head screws