EOS 94 6220, Инструкция по установке и эксплуатации

Страница: 23 / 59

23
EN
Dear customer
You have bought a high-quality technological
device which will give you years of pleasure.
This flake ice machine was designed and tested
in compliance with the current European safety
standards and was produced in the manufac-
turer‘s factory in compliance with the quality
standard DIN EN ISO 9001:2015.
These assembly and operating instructions have
been drawn up for your information. Please read
the important information and the informa-
tion about the electrical connection through
carefully.
We wish you an exhilarating and refreshing
recreational experience.
Delivery scope
The following are included in the scope of
delivery:
1 flake ice machine E-Cool Wall
1 ice level sensor for light, wall-mounting,
with 5 m connection cable
1 hose set
1 reduction fitting
1 rtainless steel tube (ice chute)
1 set of installation and operating instructions
Models with the bottom ice chute:
1 HT pipe 75 (1m)
1 Elbow pipe 45°
1 Armaflex hose (1 m)
General information
Check first that the flake ice machine is undam-
aged on delivery. Please reclaim transport dam-
ages immediately with the forwarding company
or contact the company who supplied you with
the device.
The flake ice machine is designed for installation
in rooms with room temperatures between
10 °C and 40 °C. If the machine is operated for
longer periods outside this temperature range,
this is regarded as incorrect handling and will
invalidate the warranty.
Optimum ice preparation only can be guar-
anteed, by using an input temperature of the
connected water supply below 30 °C.
The water circuit must be disinfected on a
regular basis so that no germs or bacteria can
be collected.
E-Cool Wall B
E-Cool Wall S
Appropriate use
The intended purpose of this flake ice machine
is the continuous production of flake ice. The
filling level of the collection tray is monitored
by a sensor.
Compliance with the standard operation,
maintenance and repair conditions is also an
element of appropriate use.
The manufacturer cannot be held liable for
deviating, unauthorized alterations and any re-
sulting damages: the initiator of these changes
bears the full risk.
Ice level sensor with
mounting bracket
and cable