3
GB
Design and installation of IR foils (heating mats):
Polyester foil / Polyester foil with aluminum
heating element, heavy-metal free,
excessive temperature thermostat at upper
end of foil in silicone housing
Switch-off point = 120 °C
Switch-on point = 110 °C
40 mm wide edge without heating filaments
all the way around for fastening foil.
Channeled
boards on
outside
Insulation
Channeled
boards on
inside
Heat radiation
Layout
Operating principle
Provide for opening for
silicone housing for
excessive temperature
thermostat
Heating area
of foil
40 mm wide
fastening
edge all the
way around
The IR heating foils are intended only for
installation in the infrared heat booth and
should be operated only in combination
with a control unit.
Any other type of use invalidates the
guarantee.
Example of arrangement
Outer wall
Inner shell
recommanded
inner wall
dept < 12mm
component-frame
IR Heating foil
Caution!
