Eoptis CLM-194, Руководство пользователя

Страница: 9 / 29

CLM-194
User Guide
EOPTIS SRL
Via Alto Adige, 152 – 38121 Trento (TN) – ITALY
Tel.: +39 0461 260 552 – Fax: +39 0461 260 617
www.eoptis.com – info@eoptis.com
Page 9 of 29
CLM-194
Rev. 1.05 - 06/2014
Copyright © 2013-2014 EOPTIS SRL
4 S
YSTEM
S
ETUP ON
F
IRST
U
SE
4.1 R
ECOMMENDED SYSTEM CONFIGURATION

Windows XP/Vista/Seven 32(x86) or 64(x64) bits

Intel Pentium 4 2.0 GHz or compatible processor

Graphics card and monitor capable of displaying 1280x1024 resolution at 32-bit colour depth

100 MB of free hard disk space

USB2.0 port, with a supply current of 500mA
4.2 D
RIVERS AND
S
OFTWARE
I
NSTALLATION
1) Insert the software CD-ROM Software, drivers and third-party packages required by the system are installed
by means of the Installer executable, provided on the CD. Automatic detection
of the operating system and of any missing packages is supported.
Launch the “CLM194Setup.exe” by double-clicking on it and follow the
instructions. The file is not signed by Microsoft and the Operating System might
prompt for approval to proceed. It is necessary to grant the approval in order
to successfully complete the installation.
The installation sequence is:
- CLM194 application software
- Microsoft .NET Framework (*)
- Micosoft Visual C++ redistributable packages
- Device drivers
(*) installed only if not already present.
2) Plug the USB cable into the host
machine’s USB 2.0 port and
confirm successful installation
At the end of the software and driver setup, plug the USB cable into a free USB
port of the PC. The red
EOPTIS logo indicator on the colorimeter will illuminate.
If not, check the Troubleshooting section.
3) Launch the Application Software A shortcut of the application software is created on the desktop and in the
Start menu, unless otherwise specified during setup.
Launch the software by double-clicking on the desktop icon.
The green
M indicator on the colorimeter will illuminate and the serial number
of the device will be shown in the bottom-left corner next to the “Device
connected” label.
Congratulations, the system is ready for use!