Thanks for purchasing this Digital Screen Software Platform Car A/V product.To
operate the system correctly,please read this User Manual carefully before using
the unit.
Notice:
Kindly note:We keep the final explanation to this user manual and please forgive
if there is any change without additional notices.
unit,make sure your vehicle is connected to DC 12V
1.The unit is designed for 12V DC,negative ground operation system only.
Before installing the
negative ground system.
2.Be sure to connect the speaker (-) leads to speaker (-) terminal.
Never connect the left and right channel speaker cables each other or to
the vehicle body.
3.Do not put remote control under high temperature place,where will lead to
non-work of the remote control.
4.When replacing the fuse,the replacement must be of the same amperage
as shown on the
fuse holder.
5.Do not block vents or radiator panels.Blocking them will cause heat to build
up inside and
may result in fire.
6.Start the engine of the car prior to powering on the unit.Otherwise,the unit
will take the
battery away.
8.Do not redevelop the unit.
9.The unit is only suitable for 12cm disc(8cm is not suitable).
7.It's better not put Credit Card,Watch,etc magnetic things nearby the unit.
It might lead to
the loss of information of these things.
1
Contents
2
Remote Control
3
DISC playing Mode
7
DVD system Menu Setup
8
Radio
15
Navigation
17
Bluetooth
(
Optional
)
18
USB SD Playing
19
AUX
19
IPOD(optional)
20
CDC(optional)
20
Reverse Rear View
21
DVB-T(optional)
21
Setting
21
Audio Setting
22
Time Setting
23
Radio Setting
23
Calibration
24
Navigation Path Setting
24
Steering Wheel Key Control
25
System
26
Specification
26
29
Simple Troubleshooting Guide
Main Menu
7
Panel Function
5
Language Setting
24