
No work for
Remote
Control
1.There might be some obstacle between unit and remote control;
2.Remote control should aim at the receiver point of the unit;
3.Make sure the correctness of battery installation;
4.Check whether the battery has power or not.
No subtitle
1.Check whether the Subtitle setup of unit is open or not;
2.Check whether the Disc supports Subtitle function.
Staccato
Disc dirty or damaged.
Disc cannot be
loaded
There is aleady disc inside the unit.
30
Simple Troubleshooting Guide
Problem
Cause/Solution
No power
1.Check the connection of the power wire;
2.Check the fuse.Change a new fuse model same as the
replaced one.
Could not read disc
1.Check whether there is Disc in or the Disc is inserted
in right side;
2.Area code of Disc and unit might be different;
3.Disc is damaged or dirty;
4.The format of Disc is wrong;
5.Unit might be affected with damp:Take the disc out first
and make the
unit running for 1-2 hours.
1.Confirm whether the Disc supports Picture or not;
2.Display Chaos:Press RESET to resume;
3.If it's TV which has no picture,please check the
connection of TV antenna.
No Picture
Picture faintness/
distortion
1.TV Picture:Check the place of TV antenna;
2.Reset TV or change the input system of unit.
1.Reset the system of unit or TV. 2.Select screen format from
the disc menu.
Picture not fully
displayed
No sound orAudio
Output not
complete
1.Check the Disc;
2.Check whether the unit is under Mute status or not;Volume
on or off;
3.Check whether the TV system is right or not;
4.Press Channel or Language switch.
29