Operation
Operating Manual
Page
24
of
36
©2020 enz® technik ag
30.03.2020Version 1.0
Operation
Operating the spray guns
Operate the spray gun only in the specified pressure, volume flow, and temperature
range. Always check the values on the high-pressure generator each time before you
begin work and adjust them if necessary.
The following points must be followed for proper use of the spray guns:
1.
Hold the spray unit in your hand securely by the gripping surfaces provided
for this purpose and ensure that you have a good footing.
2.
To work with the spray gun, fold in the safety lock.
3.
Actuate the trigger to open the valve in the spray gun.
4.
Let go of the trigger to close the valve in the spray gun. The spray gun will
remain under pressure.
5.
To prevent accidental opening of the valve in the spray gun, fold out the
safety lock.
Figure 13: Safety lock on the spray gun
