Enwork Grid Frame, Руководство по установке

Страница: 7 / 14

15. After the 3 Grid Frames are attached at the bottom, assemble the 120 triangle cover piece to
the top of the end caps aligning the holes in the triangle cover with the holes in the end caps.
Use 3 #10-24 x 3/ 8” (UZSCREWU) thread forming screws included in kit.
16. Level as necessary.
Power
17. Feed Base Power-In through the frame and down the leg coming out the hole in the bottom of
the leg. Attach the upper connector to the frame’s power, (power in frames is pre-installed at
the factory). Adjust the length of Power-In as required, cut/add attachments as needed to
finish electrical assembly.