16
Call 1300 369 273
www.enware.com.au
Enware product should be cleaned with a soft damp cloth using only mild liquid detergent
or soap and water. Do not use cleaning agents containing a corrosive acid, scouring
agent or solvent chemicals.
Do not use cream cleaners, as they are abrasive. Epoxy coated surfaces should only
be cleaned with a cloth and clear water or mild detergent. Use of unsuitable cleaning
agents may damage the surface. Any damage caused in this way will not be covered by
warranty.
If re-greasing spring action SBA spindles, always use a silicon-based potable water
approved lubricant such as Hydroseal ‘O’ Ring Lubricant or Molykote 111 silicone based
grease.
cleaning
