enware AQUABLEND ESQX TOUCH FREE SERIES, Инструкция по установке и обслуживанию

Страница: 15 / 36

www.enware.com.au Call 1300 369 273 15
10 cm
OPERATING INSTRUCTIONS
ESQX ACTIVE SENSE
TO TURN ON
Place hand under spout, in front of sensor.
Water starts to flow.
TO TURN OFF
Simply move hand away from sensor.
Water flow stops
ESQX WAVE ON WAVE OFF
TO TURN ON
Place hand in front of sensor for 1 second,
at a distance of 10 cm. Water starts to flow.
TO TURN OFF
Place hand in front of sensor for 1 second,
at a distance of 10 cm. Water flow stops
After turning ON, the tap runs for at least 2 seconds.
(Intelligent Afterflow Function)
During this time the tap cannot be turned off.
Maximum continuous flow period is 2 minutes
OPTIONAL SENSOR FUNCTIONS
Afterflow can be increased to 4 seconds
Default sensor range 250mm can be
reduced to 170mm
Sensor sensitivity level can be reduced
if it is over sensitive
After turning ON, the tap runs for at least 4 seconds.
(Intelligent Afterflow Function)
During this time the tap cannot be turned off.
If tap is not turned OFF, it will automatically turn
OFF after a set period. (Factory default setting is
15 sec, range 8 sec - 180 sec)
If Optional 15 sec Lockout Time Function is set:
After turning OFF the tap cannot be turned ON
again for 15 seconds.
10 cm
1 sec
Wave quickly in front of
sensor (does not activate)
Place hand in front of sensor
at 10cm for 1 sec
Hand too close to sensor
(does not activate)
Move hand in towards sensor
and pulling up