enware AQUABLEND 2500 Скачать руководство пользователя страница 24

22

Aquablend 2500 Thermostatic Mixing Valve

Call 1300 369 273

        www.enware.com

Test results (complete table on following page)

Valve considered satisfactory for use

YES/NO

If NO, state reason and action taken

It is hereby certified that all the commissioning work has been 

carried out by the undersigned in accordance with local plumbing 

requirements for Thermostatic Mixing Valves

Date initial service due: 

(Maximum 

12 months use)

Valve commissioned by:

Signature Licensed Plumber

Lic/Cert No

Business name of Plumbing 

Contractor

Contractors Authority No

Date

NOTE: A duplicate copy of this report is to be retained at the site 

for any inspection by authorised persons. 

The following information is to be provided by site manager/owner:
Valve size and installation recommended by (name)
Valve supplied by (name)
Valve installed by (name)
Date of installation:

Drawing No:

Certificate of Compliance/Inspection No:

Dated:

Service manual on site:     YES/NO
Report received by (name)
Position
Signature

Date:

For and on behalf of the client/site manager/owner

Содержание AQUABLEND 2500





























Отзывы: