Envirovent heatSava, Руководство по установке

Страница: 8 / 28

SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
8
04 Safety
Electrical Assembly
When wiring the unit in, a suitable disconnect
device such as a fused spur should be
used, do not use a plug. The means of
disconnecting the unit from the mains power
supply must be incorporated in the fixed
wiring in accordance with the wiring rules.
There must be a necessity to allow
disconnection of the appliance from the
supply after installation, unless the appliance
incorporates a switch complying with the
wiring regulations The disconnection may
05 Controls
be achieved by incorporating a switch in the
fixed wiring in accordance with the wiring
regulations.
The electrical install comprises of a power
supply unit or a low voltage box - SELV. See
pages 5-6 for wiring diagrams.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
Pullcord (Manual)
The heatSava comes complete with a pull cord to activate
the boost if required. Pull once to activate the boost and
once to deactivate.
Summer Mode (Automatic)
During warmer days, the heatSava prevents warm air from
entering the room and switches to provide extract ventilation
only. As the temperature falls it automatically returns to heat
recovery mode.
Frost Protection (Automatic)
The heatSava has an automatic built-in frost protection
mechanism to prevent any damage to the heat exchange
cell in cold conditions.
Intelligent Humidity Tracking (Automatic)
The heatSava has been engineered with intelligent controls
to think for itself, meaning that you don’t need to press any
buttons or light switches to turn it on.
When the heatSava senses a rise in humidity, caused by
increased moisture generation such as through cooking or
showering, the extract and supply airflows will slowly begin
to increase in direct proportion to the increase in humidity.
It will then automatically track back down again when humidity
falls. This controls condensation quietly and efficiently.