Page 1
1
IM,
O&M Instructions – Heat Pump
10.1 Fixing Position
Door Curtain
100mm
100mm
Minimum
mounting height
2200mm
Maximum
mounting height
3000mmm
Fixed Floor
Level
Ceiling Level
To prevent
restriction to
airflow - minimum
clearance 200mm
ES Type A & B
10.2
Mechanical Installation
ALWAYS
Ensure that the installer is suitably trained or qualified to carry out mechanical installation and that they
have the appropriate PPE and mechanical lifting aids available to allow for a safe installation.
Remove front panel by removing fixing screws to access fixing points.
Replace screws into holes for safe keeping during installation.
Make sure that the final position of the unit will allow free air ways into air intake and the air discharge is
free from obstructions.
Transfer fixing position dimensions to mounting position by carefully measuring or marking through case of
unit.
Use suitable fixings to support the unit’s weight into fixing position.
Clean any debris or materials from the unit before refitting access panel.
Allow the door curtain to
overlap the opening by at
least 100mm each side.
