Doc. No. MO-RKN-3062
Version 1.5: Sep. 08, 2010
15 (38)
CONTROL UNIT OPERATION
+
-
+
-
-
+
-
+
Control unit
display
"Set" button
Temp 5.0°C
Set temp 5.0°C
"minus" button
"Menu/Enter" button
"On/Off"
button
"plus"
button
Figure 7
CONTROL UNIT OPERATION (Type 3)
Mounting Batteries
1) Open the door to the control unit.
2) Place 16 "D-cell" alkaline batteries in the holder.
Voltage
1.5V
IEC / JIS
LR 20
ANSI / NEDA
13A
3) Ensure proper battery polarity (Figure 6).
Start the Control Unit
1) Press the ”On/Off" button.
2) Make sure the default mode is visible on the display (Figure 7). The default mode show
"Container temp" and "Set temp".
The control unit type 3 has two buttons for settings and information.
-
The set temperature mode is reached via the "Set" button" (refer to next page).
-
The control unit menu is reached via the "Menu/Enter" button and includes settings and
information. Use the "plus", "minus" and "Menu/Enter" buttons to navigate in the menu (Figure
8) .
Figure 6
Set temp
View info (ambient temp & battery level)
Change to °F / Change to °C
Fan status
Connect T. Tale (not in use)
Temp Tale info (not in use)
Adjust contrast
Exit
Manufacturer settings (Login)
DEFAULT MODE
Figure 8
"Set" button
"Menu/Enter" button
"Service" button
