manualshive.com logo in svg

enviromental express ABF5000, Руководство по эксплуатации и инструкция

Поделиться
Скачать
enviromental express ABF5000 Скачать руководство пользователя страница 13

+1.800.343.5319 or +1.843.881.6560    envexp.com    

 

Environmental Express 

• 11

AutoBlock® Fill:

 Operation and Instruction Manual   

 

 

Operation

9.   Maintenance/Supplies Screen

 – This screen contains part numbers and ordering 

information for common consumable items related to the AutoBlock® Fill. 

10.  Help Screen

 – Contains contact information for technical support, links to the 

manual, and links to support videos.

Using the Onboard Touch-Screen Controller

The onboard touch screen is intended for use in routine day-to-day operations of the AutoBlock® Fill. It is functional without a PC 
being connected to the unit. The touch screen saves a copy of the sequences and methods that have been downloaded to it from 
the PC software. 

When using the touch screen, the user may cycle through all sequences that have 
been saved to the unit. When going through the available sequences the screen 
will display the method that has been assigned to that sequence, any cups that are 
selected, and the reagents being used.

After selecting the desired sequence, it will display the block size and the volume 
needed for each digestion reagent in use for that sequence. The user should verify 
that the information is correct and that the appropriate volumes are available before 
proceeding.

The next screen shows a map of the block with the selected cups to be filled. The user 
will select “OK” or “Adjust Cups” depending on how the sequence is designed.

Содержание ABF5000































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды