20
Maintenance And Service
t
op
L
ight
R
epLacement
Top light replacement bulb: G9 25W 120V (50-4119). Disconnect power cord before proceding. To replace the
bulb, first remove the door frame and curved glass (see page 17 andpage 18 for details). Remove top
light cover plate (see Figure 33) take care not to damage ceramic fiber gasket, replace if needed. Gently lower
the top light assembly and let it hang from the wires. Grab the top light glass on either side at the end with
the two metal finger retainers and pull, the glass should rotate outward. Remove bulb by hand, be careful
not to break it. Replace bulb taking caution never to touch the bulb with bare fingers. Use the foam sleeve
provided to handle the bulb or wear clean gloves. Reassemble top light in the reverse order, attach spring clip
to glass before reclipping to casing.
Figure 33: Top Light Removal
o
ptionaL
f
an
R
epLacement
(50-4247)
The S50 has an optional fan kit that can be added to the unit (50-4247). Disconnect power cord proceding.
To replace the fan, first remove the door frame and skirt (refer to page 17 and 16 for details). On the left
side of the unit there is a cavity that allows access to the fan (see Figure 34). Remove the fan retainer screw
(see Figure 35) and remove retainer. Shimmy the fan loose and work it out of the fireplace, disconnect the
electrical wires once you’re able to (see Figure 36).
Figure 34:
Fan Access Cavity
Figure 35:
Fan Retainer Detachment
