The extension brackets installed on the outside of the stove are used to make the front of the surround panel
flush with the safety screen. If the reduced install depth is required, the top and side extension brackets will
need to be removed as outlined in steps 1-3 below:
Secondary Installation
e
xtension
b
Rackets
R
emoVaL
:
REMOVAL
:
1. Using a T20 screwdriver,
remove the four (4) screws that
secure the Top Extension to the
Cabinet (see Figure 29).
2.
Remove the five (5) screws on
each Side Extension (see Figure
29).
3. Remove extension parts from
the stove.
Figure 28: Stove as Shipped
Figure 29w: Removing Extension Screws
25
