35
Secondary Installation
f
iRebox
L
ineR
anD
b
uRneR
t
ube
R
emoVaL
:
NOTE: The firebox liners are fragile and should be handled gently.
1.
Ensure the E44 is turned off and allow the unit to cool.
2. Remove the glass door as shown in the
m
aIntenanCe
anD
s
erVICe
- g
lass
D
oor
r
emoVal
.
WARNING:
Do not touch or attempt to remove the glass if the fireplace is not completely cool.
Never operate the fireplace with the glass removed.
3. Remove the log set and all ember material (if installed).
4. Use the following steps to remove the liners and the burner tube.
NOTE: Follow the steps in the reverse order for reassembly.
Figure 47:
The firebox with log set and media
removed.
Figure 48: Carefully remove the front liner (if
installed) on the bottom of the firebox by picking
it up gently.
Figure 49: The log grate is removed next by
simply lifting it off the grate tabs.
Figure 50: Remove the 6 screws highlighted
in figure 49 using a Torx T-20 screwdriver and
remove the air deflector
Figure 51:
Lift the burner off the mounts and pull
it out of the inlet box. The unscrew the panel
brackets (T20’s) from each side of the baffle to
remove the left and right side liners.
Figure 52: The rear liner can now be removed.
Use a vacuum to clean up the bare firebox if
needed.
Содержание E44I
Страница 44: ...44 Parts Diagram Components 1 2 4 3 11 9 10 6 5 7 16 8 14 12 13 15 18 17...
Страница 45: ...45 Notes...