Enviro DRIFTWOOD E33, Руководство пользователя

Страница: 9 / 40

9
Operating Instructions Operating Instructions
b
uRneR
L
ighting
:
b
LoweR
s
PeeD
:
The blower will come on only when the fireplace is up to temperature (approximately 15 minutes). The
fan controller knob can be found to the left of the door, behind the surround panel. Rotating the fan
controller knob will change the speed of the fan. To turn the blower off, fully rotate the fan controller
knob counter-clockwise.
Figure 6: E33 Control Panel.
A) Make sure the pilot is lit.
B) Turn gas control knob COUNTER CLOCKWISE to ON.
C) Flip the burner switch to ON (Located on the surround panel).
- An alternate switch location is shown in Figure 6.
D) Turn HI/LO knob to the desired flame height.
E) Turn on all electrical power to the unit.
NOTE: Check that all burner holes are lit.
TO TURN GAS FIREPLACE OFF
Flip the burner switch to OFF to turn off burner only.
If the fireplace is to be turned off for the season or for servicing, turn control
knob to OFF, turn the gas shut off valve to OFF. DO NOT FORCE IT. If the
unit is going to be serviced, turn off the electrical power to the unit as well.
NOTE: When the unit is turned on for the first time, it should be turned to
high, with the fan OFF, for the first four (4) hours. This will cure the paint,
logs, gasket material, and other products used in the manufacturing process.
It is advised that a door or window be opened as the unit will smoke, which
can irritate some people. After the unit has gone through the first burn,
turn the unit OFF, including the pilot, and let the unit completely cool. Then
remove the door and clean the glass with a good gas fireplace glass cleaner,
available at your local Enviro dealer. See m
aIntenance
a
nD
s
erVIce
- c
leanIng
t
he
g
lass
and m
aIntenance
a
nD
s
erVIce
- g
lass
D
oor
r
emoVal
.
Alternate Burner Switch Location