15
Installation
d
oor
i
nstallation
:
Remove the door from the packaging. Inspect the door assembly for damage.
DO NOT USE DOOR IF
GLASS IS BROKEN.
Place the door assembly on the two (2) hinge pins mounted on the body of the unit. Open and close the
door, applying pressure down, to ensure the door assembly is properly seated on the hinges.
Close the door
assembly and turn
the door handle
downwards until
door is tight.
Thread slider damper handle onto slider
damper control on the side of the unit.
Nut
Cast Latch
Washer (x2)
Spring Washer
Feral
Handle
