background image

31

Warranty

negligence,  misuse,  improper  installation,  alteration  or  adjustment  of  the  manufacturer’s  settings  of 

components, lack of proper and regular maintenance, alteration, or act of God.

14.  The Limited Warranty does not cover damage caused to the stove while in transit. If this occurs, do not operate 

the stove and contact your courier and/or dealer.

15. The Limited Warranty does not extend to or include paint, door or glass gaskets or firebricks damage caused 

by normal wear and tear, such as paint discoloration or chipping, worn or torn gaskets, chipped or cracked 

firebrick, etc.

16.  The  Limited  Warranty  does  not  include  damage  to  the  unit  caused  by  abuse,  improper  installation,  or 

modification of the unit.

17.  Damage to plated surfaces caused by fingerprints, scratches, melted items, or other external scores and residues 

left on the plated surfaces from the use of abrasive cleaners or polishes is not covered in this warranty. 

18.  The Limited Warranty does not cover tarnish, discoloration or wear on the plated surfaces.
19.  Sherwood Industries Ltd. is free of liability for any damages caused by the stove, as well as inconvenience 

expenses and materials. The Limited Warranty does not cover incidental or consequential damages.

20.  The Limited Warranty does not cover any loss or damage incurred by the use or removal of any component or 

apparatus to or from the Enviro stove without the express written permission of Sherwood Industries Ltd. and 

bearing a Sherwood Industries Ltd. label of approval.

21.  Any statement or representation of Enviro products and their performance contained in Enviro advertising, 

packaging literature, or printed material is not part of the Limited Warranty.

22.  The Limited Warranty is automatically voided if the stove’s serial number has been removed or altered in any 

way. If the stove is used for commercial purposes, it is excluded from the Limited Warranty.

23. No dealer, distributor, or similar person has the authority to represent or warrant Enviro products beyond the 

terms contained within the Limited Warranty. Sherwood Industries Ltd. assumes no liability for such warranties 

or representations.

24.  Sherwood Industries Ltd. will not cover the cost of the removal or re-installation of the stove, hearth, facing, 

mantels, venting or other components.

25.  Labour to replace or repair items under this Limited Warranty will be covered per our warranty service fee 

reimbursement  schedule.  Labour  rates  are  set  per  component  and  as  such  total  labour  costs  may  not  be 

covered.

26.  Sherwood Industries Ltd. is not liable for freight or labour on any stove replaced in-field and is not liable for 

travel costs for service work. In the event of in-home repair work, the customer will pay any in-home travel 

fees or service charges required by the Authorized Dealer.

27.  At no time will Sherwood Industries Ltd. be liable for any consequential damages which exceed the purchase 

price of the unit. Sherwood Industries Ltd. has no obligation to enhance or modify any stove once manufactured 

(example: as a stove evolves, field modifications or upgrades will not be performed). 

28.  This Limited Warranty is applicable only to the original purchaser and it is non-transferable.
29.  This warranty only covers Enviro products that are purchased through an authorized Enviro dealer.
30.  If for any reason any section of the Limited Warranty is declared invalid, the balance of the warranty remains 

in effect and all other clauses shall remain in effect.

31.  The Limited Warranty is the only warranty supplied by Sherwood Industries Ltd., the manufacturer of the stove. 

All other warranties, whether express or implied, are hereby expressly disclaimed and the purchaser’s recourse 

is expressly limited to the Limited Warranty.

32.  Sherwood Industries Ltd. and its employees or representatives will not assume any damages, either directly or 

indirectly, caused by improper usage, operation, installation, servicing or maintenance of this stove.

33.  Sherwood Industries Ltd. reserves the right to make changes without notice. Please complete and mail the 

warranty registration card and have the installer fill in the installation data sheet in the back of the manual for 

warranty and future reference.

34.  Sherwood Industries Ltd is responsible for stocking parts for a maximum of seven (7) years after discontinuing 

the manufacture or incorporation of the item into its products. An exception to this would be if an OEM supplier 
is not able to supply a part.

Содержание 1200-V Insert

































Отзывы: