enverid.com
7
STEP 3
Use four threaded rods to hang the unit,
fixed with screws, and install appropriate
vibration isolation devices.
The equipment location must allow
access to the filter for replacement and
the control board for service (
A
).
STEP 5
Install ductwork per local code and
SMACNA guidelines. 40” minimum
of hard duct silencers is suggested
for flexible duct installations and 60”
minimum for hard duct installations.
Both supply and return should be
insulated or lined to dampen system
sound.
Floor Slab
Filters
Silencing Section
3/8” Threaded Rod
Isolation Hangers
STEP 4
Install the Air Purifier box to the slab
with 3/8” standard threaded rod at
the corresponding position.
NOTE:
UVC lamps can be removed
prior to installing the Air Purifier box if
the UVC lamps will not be used.
A
enVerid
Air Purifier Installation, Operation & Maintenance Guide
