enverid.com
11
enVerid
Technical Specifications
4. Routine Maintenance
Make sure the power is turned off before performing maintenance.
All maintenance should be performed by a licensed contractor.
Only enVerid supplied filters should be used to ensure performance.
Maintenance Requirements
The HEPA filter should be replaced every 6 months when the UVC lamp is used and every 12 months if the UVC lamp is not used
by removing the UVC lamps from the unit.
The washable pre-filter should be washed whenever the HEPA filter is replaced and replaced every 2 years.
The UVC lamp should be replaced every 9,000 hours and cleaned whenever the HEPA filter is replaced.
The Maintenance light on the Control Panel lights up when the HEPA filter life is less than 30 days and blinks when
the HEPA filter life is less than 10 days. Filter life is determined based on a countdown of the number of days since
the counter was re-set. For most models, the counter is based on 182 days or six months. In some models, the counter is based
on 365 days. The Reset button can be used to re-set the maintenance schedule for the HEPA filter. The days remaining on the
HEPA filter can also be viewed in the notification center under the speed display on the LCD controller.
Used filters should be bagged and disposed of like other HVAC filters.
Contact your trash removal service to determine the appropriate disposal method for used UVC lamps.
Replacement parts can be ordered from the distributor who sold you the enVerid Air Purifier or from enVerid directly by calling
+1 617-795-4000 or emailing [email protected].
Floor Slab
Ceiling
Floor Slab
Air Purifier
Return Grille
Arc Grille
Air Muffler Box
3/8” Threaded Rod
Air Purifier
Ductwork
Return Grille
Supply Diffuser
Pre Filter
HEPA Filter
Air Muffler Box
3/8” Threaded Rod
UVC Lamp
Silencer
enverid.com · 1.617.795.4000 · [email protected]
Energy Savings. Air Quality.
©2021 enVerid Systems, Inc. All rights reserved. Third-party trademarks mentioned are the property of their respective owners. | 2021-0
8
-
26
_AP_Install_v
5
enVerid helps buildings achieve ESG (Environmental, Social, and Governance), healthy building, and cost saving goals by improving indoor air quality while saving money and reducing energy consumption and
carbon emissions. For new HVAC systems, enVerid’s award-winning HVAC Load Reduction (HLR) Modules enable immediate capital cost savings. HLR Modules also deliver up to 30% energy savings and superior
indoor air quality in new and existing buildings. enVerid’s air filtration products remove particulate and microorganism contamination from indoor air without the significant cost of upgrading mechanical systems and
increasing mechanical ventilation rates. enVerid’s products are deployed in commercial, academic and government buildings globally. enVerid’s HLR Modules are ASHRAE Standard 62.1, LEED, and WELL compliant
and eligible for utility rebates. For more information visit enverid.com.
