enverid.com
10
1. Operation
• Do not put your finger or other material into the air suction port or the exhaust port.
• Do not use near flammable materials, water, in places of extreme temperature, or very high humidity.
• Stop use immediately if the machine starts to vibrate excessively, make unusual noises, overheats or starts to smell.
2. Control Panel
• The system is in operation when the light is on.
• Displays the current speed of air volume.
•
MAINTENANCE
: Appears first when the filter life is less than 30
days, and starts flickering when the filter life is less than 10 days.
•
FILTER LIFE:
Check remaining days of the filter.
On/Off.
+
Increase air volume.
–
Decrease air volume.
Reset
: Short press to check the remaining days of the filter, and long
press for 10 seconds to reset counter.
Mode
: If the ECS control system is used, hold for more than 3 seconds
to turn off the ECS operating mode.
STATUS
SPEED DISPLAY AREA
CONTROL PANEL INTERFACE
NOTIFICATION CENTER
KEY PAD
3. Trouble Shooting
ISSUE
ACTION
Does not turn on
Display shows “
MAINTENANCE
”
Loud noise during operation
Check power source.
Check whether filter replacement is required.
If filter has been replaced, long press the “
Reset
” button to reset the timer.
Check whether filter replacement is required.
If filter replacement is not required, stop using the Air Purifier immediately and contact a licensed contractor.
TWO: Air Purifier Operations & Maintenance Guide
