Enttec S-PLAY, Руководство пользователя

Страница: 55 / 65

S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708 Page |55
sACN output configuration
 Configure output refresh rate for all sACN output
stream

Set output sACN each of the 32 universes
o
Universe
o
Unicast IP address
o
multicast

Save after any change by pressing "Update sACN"
 Generate sACN ID
 Set S-Play sACN priority
N.B . max refresh rate=60FPS
Change Date/Time and Location
Set time, date and location. This information is critical when setting schedules.
When the Set Date Manually is off and the S-Play is connected to an NTP server, the S-Play will
automatically update the system time information upon power-up.
If the S-Play’s system time is set manually the S-Play will stay locked to a set time. The user
must manually update the time to reflect daylight saving time twice a year.