Enttec S-PLAY, Руководство пользователя

Страница: 52 / 65

S-Play User Manual
Part No.: 51301
6 March 2021
(v26)
Document ID: 4686708 Page |52
Setup
Changing the Network Settings
Changing the Network Settings Using LCD Interface
1. Use the up or down navigation buttons located next to the screen to move to the
Settings tab
2. Use the down button to navigate to the Network settings page
The Network page can be used for the following:

Enable or disable DHCP
 Set static IP value
 Set netmask
 Set Gateway
Use the arrows and enter keys to get the desired network settings
Setting an IP
1. Toggle between DHCP and Static by pressing enter to change options and the up-down
arrow to change between options
2. Press the Enter button to select and confirm each field of the IP address
3. Use the arrows to assign a number for each byte in IP; press on the right-left arrow to
move in increments of 10, or use the up-down arrow to move in increments of one.
4. Once the desired IP is set, press enter button to move to Netmask settings
5. Repeat step 3 to set the desired netmask.
6. Once desired netmask has been set, press enter to specify the gateway settings – (this
can be set to any IP on the same Subnet as your S-play if a gateway is not required)
7. Press Enter to move out of network settings;
8. Use the arrows to navigate to the OK button and press Enter
9. All network settings assigned will get saved once the OK button is selected