light up immediately. If not, check the Ethernet cable you’ve used is the
correct type (ie – cross over or straight through) and is in good working
order, and the computer and hub/switch are functioning correctly.
You may see the Activity LED blinking occasionally if there is activity on
the Ethernet network.
Using the wing with LightFactory
Connecting the wing
Make sure the wing is connected correctly and powered up.
Start Light factory and go to the File->System Properties->External Wings
This screen will display the connected wings.
In the event you see a warning on the screen, this is due to the fact the IP
ranges of your computer and the wing do not match. This means for
ENTTEC Wing User Manual
8
