Name
Purpose
Cue
(FX)
Cue
places the cursor in the correct blank to change the
cue number of what is being recorded. It also may allow
you to load or execute a cue that is out of sequence by
using the command line.
Ex:
Cue 5 Go <Enter>
FX
can be used similarly to Cue in a command line but
will start or stop an Effect.
Ex:
FX 24 Stop <Enter>
Group
(Palette)
Group
is used in the command line to indicate a
previously saved Channel Group, so that it can be
manipulated.
Ex:
Group 33 @ 80 <Enter>
Palette
is used to recall saved Palettes in the command
line, or to assign only selected lights to the values of that
Palette.
Ex:
Palette 16 <Enter>
(All lights recorded in Palette 16 assume their recorded
levels for that palette.)
Ex: 4
4/50 @ Palette 17 <Enter>
(Fixtures 44 through 50 adopt the levels recorded in
Palette 16.)
ENTTEC Wing User Manual
21
