User Manual
50657 (PIXELATOR)
www.enttec.com
US Patent Patenting
ID: 2114
4
Factory Reset
Activating Factory Reset, leads to a simple prompt
confirming your action. Once confirmed, the Factory
Reset will take a few seconds to run. It will end up
deleting all your user created profiles, as well as any
saved settings. Please use this only when needed, or as
directed by ENTTEC support team.
F-Reset in progress
please wait …
3-Status
Status Screen, allows the following two options:
1-System
2-Network
Both the Status screens are read-only and provide
information about the system and Networking.
These require no user-input and serve as a way of
checking the performance of the unit.
4-Restart
Restart Screen, when activated, prompts for the user
to confirm the selection.
1-YES
2-NO
Once confirmed, Pixelator will stop the output engine
and restart the system. While rebooting the LCD screen
will change between a couple of screens, and the LCD
Main Menu will only be visible, once the system is fully
ready. (usually takes a minute)
System Restarting
Please wait …
Web Interface
The Pixelator is configured, controlled and programmed
through a web browser interface running on a computer
system located on the same Local Area Network. Any
modern web browser, such as Chrome, Firefox, Internet
Explorer, Safari or Opera, running under any operating
system, including Windows XP or Vista, Mac OS X or Linux
can be used.
Type the IP address (shown on the LCD Menu) into your web
browser to access the Pixelator Web Interface.
Throughout the Web Interface, helpful hints are displayed
when a user hovers the mouse over the “Help” icon?
Web: Profiles
From this screen you can manage your profiles.
As you will notice in the "Remarks" column, the factory
default profiles are read only. If you wish to modify one of
them, you will first need to copy the profile to some other
name. Once the profile has been copied you can modify it to
fit your particular needs.
Clicking on the Profile name will launch the profile in the
profile-editor window.
