Enttec DMXStreamer, Быстрый старт

Страница: 7 / 8

Quick Start Manual
MANUAL-DMXSTREAMER
For latest version visit:
www.enttec.com
7
ID: 210072
memory device or a portable media player. Playlist files
have the file type .ply
Load Playlist from Disk
Selecting the Load from Disk button brings up a prompt
for the name and folder of the Playlist file to load. The
default location is the folder containing the Streamer
Utilities program, but it can be loaded from any valid
folder, including a network file server or a removable
storage device, such as a flash memory device or a portable
media player. Playlist files have the file type .ply
Update Firmware
The Update Firmware function provides a facility to update
the firmware (internal software) of a DMXStreamer.
Downloading new firmware
To obtain the latest revision of the DMXStreamer firmware,
please visit
www.enttec.com/dmxstreamer .
The firmware file (main.rom) must be extracted from the
downloaded zip archive before it can be installed. The
preferred location for the file is in the Streamer Utilities
folder.
System Mode
The DMXStreamer must be started in System Mode in
order to load the updated firmware. To do so, follow the
steps below:
System mode is activated by simultaneously holding down
both the MENU and SCROLL buttons when turning on the
DMXStreamer.
Press both buttons and then turn on the DMXStreamer
while the buttons are pressed. Release buttons when you
see the LCD status screen display:
DMX Boot Vx.x
The version number VX.X indicates the version of the
system firmware (internal system software) installed in the
DMXStreamer.
System Mode Menu Structure

1-Self Test
 2-Firmware
 2-1-Change Main
 2-2-Change CF
Please scroll through the menu to Select 2-Firmware and then
follow the steps that follow.
ROM File (Streamer Utilities)
The firmware upgrade file must then be selected with the
Browse button before commencing the update process.
Loading the new firmware
1. Select the Activate button in Streamer Utilities.
2. Select and enter option 2-1-Change Main on the
DMXStreamer.
3. The LCD status display on the DMXStreamer shows
the progress of the data transfer.
2-1-Change Main
0 kbytes done
A progress bar also appears at the bottom of the Streamer
Utilities window
4. When loading is complete, the LCD status display
shows:
2-1-Change Main
Programming Done
5. The DMXStreamer should now be re-started.
Note: The DMXStreamer should not be switched off while
recording or data transfer operations are in progress.