USER GUIDE – v2.1
ID:
5929745
12
|
DMX USB Pro Mk2 (70314)
Visit the ENTTEC
website
for the latest version
Cleaning
Dust and dirt build up can limit the ability for the device to dissipate heat resulting in damage. It’s important
that the device is cleaned in a schedule fit for the environment it is installed within to ensure maximum
product longevity.
Cleaning schedules will vary greatly depending on the operating environment. Generally, the more extreme
the environment, the shorter the interval between cleaning.
Before cleaning, power down your system and ensure a method is in place to stop the system from
becoming energized until cleaning is complete.
Do not use abrasive, corrosive, or solvent-based cleaning products on an device.
Do not spray device or accessories. The device is an IP20 product.
To clean an ENTTEC device, use low-pressure compressed air to remove dust, dirt and loose particles. If
deemed necessary, wipe the device with a damp microfiber cloth.
A selection of environmental factors that may increase the need for frequent cleaning include:
Use of stage fog, smoke or atmospheric devices.
High airflow rates (i.e., in close proximity to air conditioning vents).
High pollution levels or cigarette smoke.
Airborne dust (from building work, the natural
environment or pyrotechnic effects).
If any of these factors are present, inspect all elements of the system soon after installation to see whether
cleaning is necessary, then check again at frequent intervals. This procedure will allow you to determine a
reliable cleaning schedule for your installation.
Package contents
PRO Mk2
USB Type-A -> Micro USB Type-B Cable
DMX Breakout cable 0.1M - DB15 to 3x 5pin DMX
Ordering information
Visit
www.enttec.com
for further support and browse ENTTEC’s range of LED lighting and control products.
Due to constant innovation, information within this document is subject to change.
Item
Part No.
DMX USB PRO Mk2
70314
