Enttec DMX USB PRO Mk2, Руководство пользователя

Страница: 8 / 12


USER GUIDE – v2.1
ID: 5929745
8
|
DMX USB Pro Mk2 (70314)
Visit the ENTTEC website
for the latest version
DMX send
PRO-Manager can be used to test the output of the DMX USB Pro Mk2. The test output can be sent in the
following ways:
 “Test Patterns” and select one of a the pre-programmed test patterns to test the DMX output

“Live Art-Net” which will start listening for an Art-Net Broadcast though the loopback IP address
(127.0.0.1).

“From Faders” and drag the desired channels fader to test the DMX output.
The output can then be verified using either DMX enabled
equipment or by using a DMX tester
While DMX is being output, the LED will blink to signify which
DMX port is being used to output.
DMX Send is not designed as a Lighting Control software, it’s
designed as a troubleshooting tool. After testing, PRO-
Manager will need to be closed, before opening the preferred
lighting control software. The DMX USB Pro Mk2 will only be
recognised by one software at a time, as the software latches
onto the USB port.
DMX receive
This tab will show a snapshot of the DMX values received through the 5-Pin Male XLR. Refresh the window
to see the updated values.
Standalone mode
The standalone mode built into the DMX USB Pro Mk2 allows the recording and playback of a DMX
sequence/show.
The DMX USB Pro Mk2 Standalone Mode is limited to 1 Universe only and can be configured using the PRO-
Manager software.
Recordings can be made either by using the DMX USB Pro Mk2’s DMX input or Art-Net though the connected
computers internal loopback IP address (127.0.0.1).
The DMX USB Pro Mk2 only records the changing frames, to maximum the length of the recording. With 512
channels (1 Universe) being recorded, with a frame rate of 40 fps with each frame being unique from the
previous, the maximum record length will be 100 seconds. If the number of channels or unique frames per
second are halved, this will double the maximum recording length.
The playback of the Standalone sequence/show can be triggered from within Pro Manager or on Power Up
of the DMX USB Pro Mk2
The DMX USB Pro Mk2 draws its power from the USB connection. The DMX USB Pro Mk2 doesn’t require a
computer connection during Standalone Playback. The DMX USB Pro Mk2 can be powered through a 5v USB
power adaptor, allowing the DMX USB Pro Mk2 to be powered from the mains.