OCTO MK2 (71521)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
16
|
ID: 5928937
Document Updated: October 2022
To clean an ENTTEC device, use low-pressure compressed air to remove dust, dirt and loose particles. If
deemed necessary, wipe the device with a damp microfiber cloth.
A selection of environmental factors that may increase the need for frequent cleaning include:
Use of stage fog, smoke or atmospheric devices.
High airflow rates (i.e., in close proximity to air conditioning vents).
High pollution levels or cigarette smoke.
Airborne dust (from building work, the natural environment or pyrotechnic effects).
If any of these factors are present, inspect all elements of the system soon after installation to see whether
cleaning is necessary, then check again at frequent intervals. This procedure will allow you to determine a
reliable cleaning schedule for your installation.
Package Content
OCTO MK2
2* WAGO connectors
1 * Din mounting clip & screws
1 * ELM Promo Code (8 Universes) on device’s sticker.
Revision History
Due to electronic design, please check your serial number and artwork on your device for
support:
OCTO MK2 (SKU: 71521) SN up to 2323030, please load firmware up to V2.1. MK1 firmware is not compatible
with OCTO MK2.
OCTO MK2 (SKU: 71521) SN 2341008 to 2350677, please load firmware V3.0 up to V3.1 only.
OCTO MK2 (SKU: 71521) released after SN: 2374307, please load firmware version V4.0 onwards only.
Use the Serial Number to claim free license for ELM software unless there is a Promo Code on the
device’s sticker. The ELM Promo code on sticker is implemented from OCTO MK2 (SKU: 71521) SN: 2374307
onwards.
Ordering Information
For further support and to browse ENTTEC’s range of products visit the
Item
SKU
OCTO MK2
71521
Due to constant innovation, information within this document is subject to change.
