OCTO MK2 (71521)
Visit the ENTTEC website for the latest version.
..
USER MANUAL
13
|
ID: 5928937
Document Updated: October 2022
KiNET
The information provided is:
Total packets received
Discover supply packets received
Discover ports packets received
DMXOUT packets
KTYPE_GET packets received
KTYPE_SET packets received
PORTOUT packets received
PORTOUT Sync packets received
Set device ID packets received
Set device IP Address packets received
Set Universe packets received
Last IP received from
Last port data received from
Help
The Help page gives a convenient access for a quick information to LED status indicator and wiring diagram.
Updating Firmware
When selecting the Update Firmware tab, the OCTO MK2 will
stop outputting and the web interface boots into the Update
Firmware mode. It may take a while depending on the
network setting.
This mode will display basic information regarding the
device including current Firmware Version, Mac Address and
IP address information.
The latest firmware can be downloaded from
. Use the Browse button to select an OCTO
MK2 firmware from your computer. OCTO MK2 firmware files
have a .bin extension.
Next click on the Update Firmware button to begin updating.
After the update has completed, the web interface will load
the Home tab, where you can check the update was
successful under Firmware Version. Once the Home tab has
loaded, the OCTO MK2 will resume operation.
Reset to Factory Defaults
The OCTO MK2 can be reset by either the web interface or the reset button on the device. Factory resetting
the OCTO MK2 results in the followings:
Resets the device name to OCTO
Enables DHCP
Static IP Address reset (IP address = 192.168.0.10)
Gateway IP address reset to default 192.168.0.254