Entrematic Ditec LUXO Series, Техническое руководство

Страница: 26 / 100

26
IP2128EN - 2015-05-06
6.1 Preliminary checks
6. Installation
The given operating and performance features can only be guaranteed with the use of ENTREMATIC
accessories and safety devices.
Unless otherwise specified, all measurements are expressed in mm.
Check that the structure is sufficiently rugged and that the hinge pivots are properly lubricated.
Provide an opening and closing stop.
Position tail bracket [14] on to the pillar to check installation measurements and secure it.
The installation measurements indicated in the table allow you to choose the values of [A] and [B] on
the basis of the desired opening angle and in relation to the on site spaces and overall dimensions.
NOTE: The measurements [A] and [B] must be the same, in order to have a regular moviment.
Increasing [A] decreases the coming up speed during opening.
Reducing [B] increases the extent of gate opening.
Measurements [A] and [B] must in any case be compatible with the useful travel of the piston so
that; if [A] is increased, [B] must be decreased and vice versa.
A
D
E
L
min 60
B
C
[*] Use measurements between minimum and maximum values
A* B* A B C D E L
LUXO3B
LUXO3BH min 105
max 160
min 130
max 170
130 170 100 90°
90 760
105 140 70 90°
130 130 60 95°
160 130 50 110°
LUXO4BH
LUXO5B
LUXO5BH
LUXO5VBH
min 130
max 200
min 170
max 290
170 170 100 90°
120 910
200 200 130 95°
200 170 100 120°
130 290 220 90°