Entrematic Ditec FA-8, Руководство по установке

Страница: 3 / 15

3
GENERAL INFORMATION
The HA/FA-8 can be used for pull side and push side installation on the top doorjamb and in header
applications. It is designed to meet the following codes and standards:

ANSI A156.19
– for ADA – low energy swinging doors

ANSI A117.1 Safety Code, Section 404.3 requirements

ADA law section 4.13.12
Model
Ditec HA-8, FA-8
Dimensions
4.5”(W) x 6.5”(H) x 39” (L standard)
Weight Approx 45lbs
Power supply 115±5VAC, 60Hz, 3A
Motor 1/5 hp, 24VDC, 3A
Rated operation Continuous opening and closing cycles
Manual door opening/closing force
during power failure 30 lbs.
Door opening/closing speed Adjustable
Door opening/closing force Adjustable
Shipping Inspection
Verify that the order was shipped complete and correct, including model number, door swing, color, and
header width.
NOTE: The gearbox housing has the swing hand (L or R) stamped on the top of the motor
mounting flange.
NOTE: If any of the above items are not correct, do not attempt to install the HA/FA-8 Swing Door
Package! Report any incorrect items to the general contractor immediately. Do not proceed until
all conditions are correct.
NOTE: NO CLAIMS FOR SHORTAGE WILL BE ALLOWED UNLESS REPORTED WITHIN 24 HOURS
OF RECEIPT OF SHIPMENT