3
AE
S
ystems
Automatic Entrance
www.aesystems.be
General safety precautions
• Keep these instructions for future reference.
• Installation, electrical connections and adjustments must be performed by qualified personnel in accordance
with Good Working Methods and in compliance with the current standards.
• This product must only be used for the specific purpose for which it was designed. Any other use is to be consid-
ered improper and therefore dangerous. The manufacturer cannot be held responsible for any damage caused
by improper, incorrect or unreasonable use.
• Read the instructions carefully before installing the product. Incorrect installation may cause danger.
• Before installing the product, make sure it is in perfect condition.
• Do not install the product in explosive areas and atmospheres: the presence of inflammable gas or fumes rep-
resents a serious safety hazard.
• Danger of explosion if a battery is replaced with an incorrect type.
•
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the environment or left
within reach of children, as they are a potential source of danger.
Disposal of electric /electronic waste
The crossed-out wheeled bin symbol indicates that the product should be disposed of separately from
household waste. The product should be handed in for recycling in accordance with local environmental
regulations for waste disposal. By separating a marked item from household waste, you will help reduce
the volume of waste sent to incinerators or landfill and minimize any potential negative impact on human
health and the environment.
Observe all applicable legal requirements for your area when disposing of the battery. The battery may not be dis-
posed of in the domestic refuse bin!
