EDSL450 User manual
6
1
Introduction
The sliding door is designed to enable easy access to and from buildings or between building
sections.
The sliding door has 3 primary parts:
1.
Door leaves
2.
Drive unit
3.
Activators / Safety sensors
1.1
Door Leaves
The door leaves are usually made of glass and surrounded by profiles made of aluminium. Brush
profiles are installed on the door leaves to reduce draft. The door leaves are suspended from the
carriage wheels. The door adapter profile connects to the carriage wheels and the door leaves. The
bottom of the door leaves are kept in position by the floor guides.
1.2
Drive unit
The drive unit opens and closes the sliding door. The door leaves are connected to the drive unit via
the carriage wheel brackets.
The drive unit consists of:
1.
Mounting profile
2.
Motor
3.
Tooth belt
4.
Control board
5.
Carriage wheel assembly
6.
Power Supply
7.
Power failure backup batteries
8.
Tension wheel
