Enterasys SecureStack C2 C2RPS-POE, Руководство по установке, Страница: 13 / 34

SecureStack C2 Installation Guide xi
About this Guide
This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys SecureStack C2RPS ‐ POE power supply, which can
provide a redundant power source to a SecureStack standalone POE switch.
Using This Guide
Read through this guide completely to familiarize yourself with its contents and gain an
understanding of the features and capabilities of the C2RPS ‐ POE power supply
.
A general
working knowledge of data communications networks is helpful when setting up a
C2RPS ‐ POE power supply.
Structure of This Guide
This preface provides an overview of this guide and the SecureStack C2 manual set for
PoE ‐ compliant devices, and explains the symbols used throughout this manual.
Chapter 1 , Introduction , discusses the features and capabilities of the C2RPS ‐ POE power
supply. This chapter also provides the instructions for obtaining help from Enterasys
Networks, if needed.
Chapter 2 , Installation , provides instructions to install a C2RPS ‐ POE power supply into a
standard 19 ‐ inch rack. This involves installing the C2RPS ‐ POE power supply and one 48
Vdc interconnecting power cable, and AC power cord. Troubleshooting is also covered in
this chapter.
Appendix A , Specifications , provides the specifications for the C2RPS ‐ POE power
supply, Redundant Power Supply connector pin ‐ out description, C2RPS ‐ POE Cable, and
Compliance Standards.