Enterasys SecureStack C2 C2G170-24, Руководство по установке оборудования, Страница: 15 / 74

SecureStack C2 Installation Guide xiii
About This Guide
This guide provides an overview, installation and troubleshooting instructions, and
specifications for the Enterasys
®
SecureStack C2G170 ‐ 24 stackable Gigabit switch.
For information about the Command Line Interface (CLI) set of commands used to
configure and manage the switch, refer to the Enterasys Networks
®
SecureStack C2
Configuration Guide .
Who Should Use This Guide
This guide is intended for a network administrator responsible for installing and setting
up the stackable switch.
Note: In this guide, the following terms are used:
• Switch refers to a C2G170-24, unless otherwise noted.
• XSP refers to optional small-form pluggable interface modules that plug into the front
panel port slots 25 and 26.
Important Notice
Depending on the firmware version used in the C2G170-24 switch, some features described in this
document may not be supported. Refer to the Release Notes shipped with the switch to determine
which features are supported.
Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.