Enterasys 8000/8600, Руководство по началу работы

Страница: 80 / 142

Installing the Hardware
68 Enterasys X-Pedition 8000/8600 Getting Started Guide
Note: Make sure that the circuit card is between the card guides. Check both tracks.
Figure 32. Insert card between card guides
7. Slide the upgraded Control Module back into the chassis. Return the Control Module to the
chassis, firmly but gently pressing the line module fully in place to ensure that the pins on the
back of the line card are completely seated in the backplane.
8. Tighten captive screws. Align the captive screws with the holes in the face of the module and
tighten the screws to secure the module to the chassis.
9. Power on the X-Pedition chassis. Move the power switch located on the power supply to the
“On” position. As the X-Pedition boots, messages on the console will appear, reflecting the
memory upgrade on the Control Module.
Card Guides
Circuit Card
Metal Plate
Console
10/100 Mgmt
SSR-CM2-64 CONTROL MODULE
SSR-8