Enseo NAVY DVD, Руководство по эксплуатации и обслуживанию, Страница: 8 / 24

page 8
Connections
The back panel of the Enseo Navy DVD player is displayed in the diagram below. These are the connections that the
Enseo Navy DVD player has; however, only a few are used under typical operation.
•
Power Input
– The power input is where a power source is connected to the player via the power cable sent
with the Enseo Navy DVD player.
•
Power Switch
– When first received, the power switch will be set to OFF. This must be turned on before the
Enseo Navy DVD player will react to a power source.
•
Aux
– Aux is an auxiliary port located to the right of the power input on the Enseo Navy DVD player. It is not
used under normal operation.
•
Maint Port
– The Maint Port is the maintenance port used to handle operations that require RS-232 feedback
from the Enseo Navy DVD player. This is not used under normal operations, and is primarily for troubleshooting
issues.
•
Digital Audio Out
– Digital Audio Out is a source for optical audio out of the Enseo Navy DVD player. This
is always active, but not required to be connected for the system to work. Connecting this port to a sound sys-
tem that can handle optical audio will send audio that the Enseo Navy DVD player is producing to that system
for playback.
•
Video Out
– Video Out is a BNC connection that sends composite video from the Enseo Navy DVD player.
This is always active, but is not required for the system to work. When this is connected to another system that
receives composite video, it will playback the video being produced by the Enseo Navy DVD player (when it is
tuned to it).
•
Audio Out
– Audio Out is two RCA connections for left and right composite audio out. This is always active,
but is not required for the system to work. Connecting these sources of audio to a sound system capable of
composite audio will send audio that the Enseo Navy DVD player is producing to that system for playback.
•
HDMI
– The HDMI connection is an HDMI video source generated from the Enseo Navy DVD player. This is
always active, but is not required for the system to work. Connect a device capable of receiving an HDMI source
for high definition video and audio (as provided by the encoded material). An HDMI to DVI adaptor may be
used to push video signal to a DVI source on a system.
Note that another source from the Enseo Navy DVD player may then be used to get audio from content playback.
•
Display Control
– Display Control handles control properties of the TV when available through the Enseo
Navy DVD player. Currently this feature is not active, and is not intended nor required for operational use of the
Navy DVD player.
AUX
MAINT
PORT
DIGITAL AUDIO
OUT
VIDEO
OUT AUDIO OUT
HDMI DISPLAY
CONTROL USB
NETWORK