Enseo Hd2000 RF, Руководство пользователя

Страница: 10 / 27

page 10
4.
UDP/RTP
– These IP stream “Channels” require an IP address
and port information in order to tune to the I/P stream chan-
nel you desire to view.
Note:
Depending on the selection type, the menu options will change for
the Channel List menu
Analog Type Selection:
The options for an analog channel include a customized Label for
the channel, addition of a thumbnail logo for the channel and se-
lection of audio/video options for the channel.
Digital Type Selection:
1.
Browse Digital Channels
- Available for scanning through
digital channels after they have been scanned using the Digital
Channel Search function from the Channel Options Menu.
Note
: To browse the digital channels, a standard Sony
TV remote, with CH+/CH- buttons is required. The
remotes provided with the FWD and KLH model dis-
plays do not include CH+ / CH- buttons and cannot
browse the scanned digital channels. Also note that
the encrypted channels will display a blank screen until
actually placed in the channel ring.
2.
Selection Method
- Digital streams may contain information
that allow for the creation of virtual channels. For example,
station WXYZ may transmit on channel 14.1, but include infor-
mation that describes the channel as 8.1. This is done in situations where name branding has occurred and the
station still wants to be identified with its old allocation.
In the example above, 14.1 is the direct channel and 8.1 is the virtual channel. The Enseo unit is able to
capture and interpret these virtual channels. When setting up your channel ring, you may choose between the
virtual channel ID or the actual channel information.
3.
Digital Channel
- This section provides for the entry of the Channel Primary digits and Sub (Program) digits for
the known digital channel
4.
Label
- Entry using UP / DOWN arrow buttons to enter a text label for the channel
Note
: PPV systems may not use the label setting in the HD2000RF and instead use own label method. Confirm
with your PPV provider if label information will be used.
Image 6 – Digital Channel Options
Image 5 – Analog Channel Settings