BrightEye 90-FA HD Up/Down/Cross Converter and ARC with Analog Audio and Optical Output
Demultiplexer Mode
When the module is set for
Demux
, the Input menu provides the controls
shown below.
•
Group A Status
– the status of the audio selected in
Group A Select
will be displayed as
Off
,
No Audio Present
,
Group1 OK
,
Group 2 OK
,
Group 3 OK
, and
Group 4 OK.
•
Group B Status
– the status of the audio selected in
Group B Select
will be displayed as
Off
,
No Audio Present
,
Group1 OK
,
Group 2 OK
,
Group 3 OK
, and
Group 4 OK.
•
Group A Select
– select the audio group to demultiplex from
Group
1
,
Group 2
,
Group 3
,
Group 4
, or
Off
for either control.
•
Group B Select
– select the audio group to demultiplex from
Group
1
,
Group 2
,
Group 3
,
Group 4
, or
Off
for either control.
Mixer A
Use the
Mixer A
and
Mixer B
menus to control the audio mixing and shuffling of
the module. Each output bus assignment is indicated by a green box.
For Channels 1 – 4, use the
Mixer A
menu to set the following:
•
Input Ch 1
– assigns Input Channel 1 to the desired output bus or tie to Channel
2. Set the input level using the slider control or by entering a number in the
window and pressing the
Enter
key on your computer.
•
Input Ch 2
– assigns Input Channel 2 to the desired output bus or tie to Channel 1.
Set the input level using the slider control or by entering a number in the window
and pressing the
Enter
key on your computer.
•
Input Ch 3
– assigns Input Channel 3 to the desired output bus or tie to Channel 4.
Set the input level using the slider control or by entering a number in the window
and pressing the
Enter
key on your computer.
•
Input Ch 4
– assigns Input Channel 4 to the desired output bus or tie to Channel 3.
Set the input level using the slider control or by entering a number in the window
and pressing the
Enter
key on your computer.
Selecting the
Tie
button in Input Ch 1 or Input Ch 2 will tie the two controls
together. Selecting the
Tie
button in Input Ch 3 or Input Ch 4 will tie the
controls for these channels together.
Click the
Default
button to return to the default value.
Click the
Invert
button to invert the phase of the audio content.
BrightEye-20
