TM
BrightEye 90-FA
BrightEye-11
Front Panel Controls and Indicators
The front panel of the BrightEye 90-FA, shown below, provides status and control
indicators for the unit.
Status Indicators
The following status indicators are provided on the front panel:
Embed In
Illuminates when an embedded audio stream is detected on the
HD/SD
SDI/Cpst In
video input BNC. This applies only to SDI signals.
Audio Mode
Indicates the currently selected audio I/O mode. Choices are
Mux 4
(4 inputs
and 4 outputs),
Mux 8
(8 inputs), or
Demux
(8 outputs).
Gain (Audio)
These controls allow for quick adjustment of Gain level for the channel pairs.
Gain adjustment is done in conjunction with the VU indicators. For indepen-
dent channel adjustment, and other controls, use BrightEye PC or Mac. The
indicator illuminates green when the gain for a given audio channel pair is set
to nominal or unity setting, or red when set to other than unity.
VU
VU output level and the status of the Gain adjustment for each of these
channel pairs is indicated by the state the VU and Gain indicators for each
of the channel pairs. The VU indicator illuminates red when the audio level
exceeds the headroom level set by the user (using the Peak Indicator control
in BrightEye PC or Mac). The indicator illuminates green when the gain
for a given audio channel pair is set to unity, red when set to other
than unity, or yellow when gain exceeds 0 VU (-20dBFS).
NOTE
:
BrightEye 90-FA Front Panel
