SETTING AVENET AND IP ADDRESSES
Networking an Avenue frame is explained in detail in the Avenue System Overview. This
data pack is available online from http://www.ensembledesigns.com.
For networking the Intersection frame into an Avenue network, the AveNet and IP
addresses of each frame must be set at the frame using the Status menu functions on the
front of the System Control Module. The Status menu display and the switches are shown
in the illustration on the next page.
The Status menu is used for various purposes. It acts continuously as a status indicator
for showing system communication between the Avenue frame and external Ethernet and
External Reference connections. A series of menu functions can also be accessed through
the Status menu as listed below:
•
Display current software version running on this control module
•
View and change AveNet and IP addresses
•
Enable AVIP function and set lower and upper AveNet addresses in frame group.
Avenue Intersection–8
