Warning
Rick of electric shock. Qualifed service personael should only access
power supply after frame has been unplugged from power.
This is a Class A Laser Product. The optical output emits invisible
radiation. Do not stare directly into the optical output beam or view
directly with optical instruments.
INTERSECTION FRAME INSTALLATION
The 1 RU Avenue Intersection Frame is designed to be installed in a standard 19 inch
rack with four customer-supplied standard rack screws. This section explains any physical
installation and cabling instructions necessary for using Avenue Intersection Frames.
After physical installation, network configuration of the Local controls on the Control
module in the frame. Refer to the
Configuration
section of this data pack.
5065 Power Supplies
Each Avenue Intersection frame includes a single 5065 Power Supply module. It installs
in the upper right slot of the frame. Power is provided to all modules in the frame where
it is regulated to the required voltages for the module. A redundant power supply can be
ordered. Power supplies are hot-swappable.
Cabling
Network connection of an Intersection Frame is made on the rear of the panel as
illustrated below. The Intersection Frame can communicate with Avenue frames through
via Ethernet or through an AveNet connection.
Avenue Intersection Frame
Avenue Intersection–5
Intersection Frame Rear Connectors
